Download Electro-voice Port Devices Driver

Download cnc usb controller driver for free. System Utilities downloads - CNC USB Controller by planet-cnc.com and many more programs are available for instant and free download. 2.4 u-blox Virtual COM Port (VCP) Device Driver In addition to the Sensor Device Driver, u-blox provides a Virtual COM Port (VCP) driver to help customers connecting or testing u-blox GNSS positioning chips and modules with legacy Windows applications that can connect only to a COM port.

[2020 Updated] Download USB Drivers for Any Android (Samsung/ Motorola /Sony/ LG/ HTC/ ASUS/ Huawei and others): .Here we are sharing all the latest Android USB Drivers for Windows and Mac. You can download them from the download section below and install them on your PC or Mac

Popular Driver Downloads NI-DAQmx. Provides support for NI data acquisition and signal conditioning devices. Provides support for Ethernet, GPIB, serial, USB. DS4Windows is a portable program that allows you to get the best experience while using a DualShock 4 on your PC. By emulating a Xbox 360 controller, many more games are accessible.

USB Drivers are one of the must-have tools to be installed on your PC or Mac. Because of that, your mobile device interacts with your PC.These work as Bridge between your Phone and your computer. The USB drivers help us to connect our phone to the computer and perform tasks like transferring data, syncing your device with a PC. They help us to connect our Android devices to tools like Odin, Sony Flash tool, and SuperOneClick.

Below, we are sharing the links to USB drivers for most of the popular Android device manufacturers like Samsung, LG, Sony, Google, HTC, Motorola, Dell, etc. These USB drivers are safe to use as they are from their respective manufacturers. All the links are valid and official. We recommend you to download the latest USB drivers

[note type=”important”]It is highly recommended to Enable USB debugging on android smartphones before performing any task in the fastboot mode. [/note]

Download USB Drivers for Android

I.Download USB Drivers for Android

Samsung USB Drivers

Download Electro-voice Port Devices Driver
Latest Samsung DriversDownload
Download Latest Samsung KiesDownload
Samsung Android ADB Interface Driver v2.9.510.0Download

OnePlus USB Drivers

Latest OnePlus USB Drivers (Windows and Mac)Download

For MediaTek VCOM Driver

MediaTek VCOM MTK Drivers (Updated)Download

Motorola USB Driver

Latest Motorola USB Drivers (Win & Mac)Download

Google USB Drivers

Latest Google USB DriversDownload

HTC USB Drivers

Latest HTC USB Drivers 4.17.0.001Download
HTC Sync ManagerDownload

Sony USB Drivers

Latest Sony USB DriversDownload
Sony PC CompanionDownload
Sony Bridge for MacDownload

LG USB Drivers

Latest LG USB DriversDownload
LG Flash and LG UP ToolDownload
LG UpperCut ToolDownload
  • LG United Drivers for Verizon Mirror

Dell USB Drivers

Latest Dell USB DriversDownload

Go to the link and choose your mobile device or tablet to download the specific version USB drivers.

Intel Android USB Drivers

Latest Intell Android USB DriversDownload

ZTE USB Drivers

Latest ZTE USB DriversDownload

LeEco USB Drivers

Latest LeEco USB DriversDownload

ASUS USB Drivers

Download Asus PC suite PC Link (drivers included)Download

Huawei USB Drivers

Download Electro-voice Port Devices Driver Download

Latest Huawei USB DriversDownload (Check below)
  • Download HiSuite (drivers included) Windows Mac

Acer USB Drivers

Latest Acer USB DriversDownload

Sharp USB Drivers

Amazon USB Drivers

Latest Amazon USB DriversDownload

Pantech USB Drivers

Latest Pantech USB Drivers (PC Suit)Download

XIAOMI USB Drivers

  • Download Mi Phone Manager (PC Suite) Mirror

Lenovo USB Drivers

Latest Lenovo USB DriversDownload

Micromax USB Drivers

Latest Micromax USB DriversDownload

Video Guide: Enable Developer Options, USB Debugging and OEM Unlock On Android

Download Electro-voice Port Devices Driver [note type=”important”]

In case the above drivers do not work for you, do as described below:

  • Go to the official site of the manufacturer
  • Type the name and model of your device in the search box.
  • Select your device and click the Support tab/button.
  • You will get the download link for the specific USB Drivers for your device.
  • Download the drivers and install onto your computer. [/note]

If you have any question, feel free to ask in the comment below.

Rootmygalaxy a.k.a RMG was started in 2015 with a solo goal of Helping users with easy How-to guides. Slowly the website started sharing exclusive Leaks and Tech News. In these 5 years, we have been credited by the likes of Forbes, CNBC, Gizmodo, TechCrunch, Engadget, Android Authority, GSM Arena and many others. Want to know more about us? Check out ourAbout Us pageor connect with us ViaTwitter, Facebook, YoutubeorTelegram.

On this page there are links to download driver software writtenby Meinberg, and also associated manuals inAdobe PDF format.

There is driver software for the following operating systems available:

On Unix-like operating systems all Meinberg radio clockswith a serial port are supported by the public domainNetwork Time Protocol (NTP)package. Under Windows NT/2000 and newer, NTP canbe used together with Meinberg's driversto synchronize additional computers on the TCP/IP network.

NTP software and manuals are available at our NTP download page.

Download MEINBERG NTP / PTP Simulation Software (Demo):

  • MPSv2 Change Log
    Recommended operating systems: Linux Mint ≥ 18.3 (64 bit) or Ubuntu ≥ 18.04.

Additionally there are some utilities available for download:

  • Meinberg Device Manager (Windows and Linux)for configuration and monitoring of Meinberg receivers via the serial interface or network connection(supersedes the gpsmon32 monitoring software)
  • MBG Flash Used to update firmware of radio clocks and otherdevices with flash memory.

More Ressources:

  • Software Development Kits SDKs for different programming languagesand development environments to access a Meinberg device from within an own applications.
  • Shapes for Microsoft Visio Shapes for various Meinberg systemsand accessories, to be used with Microsoft Visio
  • SNMP MIB Files Management Information Base files for various Meinberg systemsand accessories, to be used with SNMP-based Network Management Systems like HP OpenView or IBM Tivoli.

Driver Software for all Windows versions since Windows NT

Download Electro-voice Port Devices Driver


Windows NT
up to
Windows 10
Windows Server 2019
Platform i386 (32 Bit)
Platform x64 (64 Bit)
Software
dkwin-3.10.exe
July 2, 2020
1.5 Mbytes
How to verify integrity
of the downloaded file
Release Notes

The driver package can be used to synchronize the computer's system time.It supports all Meinberg plug-in radio clocks for PCs with PCI or ISA bus,all Meinberg USB devicesand all external radio clocks which are connected to a serial portof the computer (COM port) and transmit theMeinberg standard time string.

The Meinberg Time Adjustment Service runs in the backgroundand keeps the system time synchronized with the radio clock's time.

The monitoring utility MBGMON can be used to start, stop,control, and monitor the time adjustment service. The program isalso used to monitor and configure the supported plug-in boardsand USB devices.

Detailed information on the software can be found in the onlinehelp of the monitoring utility.

The public domain NTP software packagecan be used together with this driver package to synchronize additionalcomputers over the TCP/IP network.


Driver Software for DOS, Windows 3.x/9x

Download Electro-voice Port Devices Driver
DOS
Windows 3.x
Windows 9x
Software
dkdos223.zip
August 14, 2007
127505 bytes
Manual
German
softdos.pdf
Manual
English
softdos.pdf

The driver package for DOS/Windows 3.x/Windows 9.x supports allMeinberg plug-in radio clocks for PCs.This driver does not support radio clocks connected via aserial interface.

The resident driver (TSR) reads the time from a radio clockin periodic intervals and sets the computer's system time.

If the computer operates in DOS text mode the current radio clock timecan be displayed in a box at a corner of the screen.

The monitoring program PCPSINFO shows the radio clock's and theTSR's status information and can be used to setup configurableparameters of the plug-in cards.

Hint for PCI Cards:
Plug-and-play driver installation on Windows is not supported.

If Windows starts up after a new PCI card has been installedit tries to locate a driver for the new card. Every popupdialog should be acknowledged by pressing OK, so Windowswill install an 'unknown device'.

After Windows startup has been completed, the DOS driver canbe installed normally.

Attention:
If the installation of the 'unknown device' is aborted,Windows will ask again for a driver when it starts upthe next time.

Version Information:

DKDOS223:
  • Additionally support the new PCI Express cardsPEX511,GPS170PEX, andTCR511PEX.
DKDOS222:
  • Fixed a bug where the TSR did not always recognize some older PCI cards.
  • Enhanced configuration dialog for the synthesizer settings.
DKDOS221:
  • Additionally support the new PCI cardsPCI511,GPS170PCI, andTCR511PCI.

Windows 9x
Windows ME
Software
win9xv13.zip
August 11, 2003
539326 bytes
Manual
German
mbgtimemon.pdf
Manual
English
Not available

In addition to our resident DOS/Windows driver (see above), there is a driver for Windows 9x/MEavailable that supports time synchronization over a serial interface.

The driver package for Windows 9x can be used with all external radio clocks which areattached to a serial port of the computer (COM port) and transmit theMeinberg standard time string.

The driver package reads the time from a radio clock in periodic intervals and sets the computer's system time.

Time deviations will be ascertained and corrected by the driver program. The driver runs in the backgroundand keeps the system time synchronized with the radio clock's time.The driver will be shown in the windows traybar. Additionally, the program is used to display status informationfrom the clock and of the current time synchronization as well.


Driver Software for Linux


MBGTOOLS
for
Linux
Kernel 5.x
Kernel 4.x
Kernel 3.x
Kernel 2.6.x
Platform i386
Platform x86_64
Software
mbgtools-lx-4.2.14.tar.gz
2020-10-20
800k bytes
SHA512 Checksum:
mbgtools-lx-4.2.14.tar.gz.sha512sum
How to verify integrity
of the downloaded file
Release Notes
git-Repositiory

Important notice:
For Linux kernels 5.8 or newer, no driver packageolder than 4.2.12 should be used. For details see thechangelog entry.

This archive contains a Linux driver module for Meinbergplug-in radio clocks with PCI or ISA bus, and Meinberg USB devices.This driver is only required for plug-in radio clocks and USB devices.Radio clocks which are connected via a serial interface are directly supported byNTP.

The driver allows access to a plug-in radio clock from a userprogram, and additionally implements a device which makes theradio clock available as a reference clock forNTP.

The driver is shipped as source code and has to be compiled on the target system.The current version 4.x can be used with Linux kernels 2.6.x, 3.x, 4.x and 5.x up to at least 5.9.

Supported hardware architectures include Intel/AMD 32 bit (i386, standard PC)and 64 bit (x86_64).

For more detailed information and installation instructionsplease refer to the README file which is included inthe archive.


Driver Software for FreeBSD


MBGTOOLS
for
FreeBSD
FreeBSD 8.x
bis
FreeBSD 12
Platform i386
Platform x86_64
Platform ARM
Software
mbgtools-fbsd-1.0.0.tar.gz
2017-07-06
550k bytes
SHA512 Checksum:
mbgtools-fbsd-1.0.0.tar.gz.sha512sum
How to verify integrity
of the downloaded file
git-Repositiory

This archive contains a FreeBSD driver module for Meinbergplug-in radio clocks with PCI bus.This driver is only required for plug-in radio clocks.Radio clocks which are connected to the PC via a serial interface are directly supported by theNTP software.

The driver allows access to a plug-in radio clock from a userprogram, and additionally implements a device which makes theradio clock available as a reference clock forNTP.

The driver is shipped as source code and has to be compiled on the target system.The current version 1.0.0 can be used with FreeBSD 8 up to FreeBSD 12.

Supported hardware architectures include Intel/AMD 32 bit (i386, standard PC)and 64 bit (x86_64), and ARM.

For more detailed information and installation instructionsplease refer to the README file which is included inthe archive.


Download Electro-voice Port Devices driver

Driver Software for Novell NetWare


NetWare 3.1x
NetWare 4.x
NetWare 5.x
NetWare 6.0
NetWare 6.5
Software
dknw240.zip
August 14, 2007
115804 bytes
Manual
German
softnw.pdf
Manual
English
softnw.pdf

The driver package for Novell NetWare supports allMeinberg plug-in radio clocks for PCs and all radio clockswhich send out the Meinberg standardtime string via serial RS-232 interface.

A time server NLM (NetWare Loadable Module) can be loadedon a file server which has a radio clock installed. The time serversoftware keeps the file server time synchronized with the radioclock's time and displays the radio clock and time synchronizationstatus.

With a plug-in radio clock forDCF77 the NLM can also be usedto check the received signal and second marks.

Additionally, the time server NLM makes the disciplined file servertime available on the IPX network.

A time client NLM can be loaded on additional file serverswithout own radio clock. The time client queries the reference timefrom a time server NLM running on another file server on the network.

The time server NLM can also send IPX broadcast time packetsto the network which can be received by DOS/Windows workstations tokeep workstation time synchronized to the file server time.

A memory resident IPX broadcast receiver for DOS/Windows 3.x/Windows9x is part of this driver package.

Workstations with modern operating systems can usually be synchronizedTCP/IP, using the Network Time Protocol (NTP).NetWare 5 and later also supports NTP direktly.The Netware server which has the role of a timeserver should run TIMESYNC.NLM v5.23or newer since NTP support in earlier versions of TIMSYNC:NLM has some bugs.

Version Information:

DKNW240:
  • Additionally support the new PCI Express cardsPEX511,GPS170PEX, andTCR511PEX.
DKNW230:
  • Additionally support new PCI devicesPCI511,GPS170PCI, andTCR511PCI.

Driver Software for OS/2


OS/2 2.1
OS/2 Warp
OS/2 Warp 4
Software
dkos2205.zip
August 14, 2007
39206 bytes

The driver package for OS/2 supports all Meinberg plug-inradio clocks for PCs.

This driver does not support radio clocks connected via aserial interface.

The package includes a device driver and an utility runningunder the OS/2 Presentation Manager. The utility shows theradio clock's status and synchronizes the computer's systemtime to the radio clock's time.

With a plug-in radio clock forDCF77 the utility can also beused to check the received signal and second marks.


Download Electro-voice Port Devices Driver Windows 7

GPSMON32 (out of support since 2017-06)

Download Electro-voice Port Devices Drivers


GPSMON32
for
Windows
Software
mbg-gpsmon32-v228.exe
2013-07-15
726,195 Bytes

This utility can be used to configure Meinberg GPS receivers via their serial ports.

The program has initially been written to be used with our GPSreceivers which do not have an own display. However, it can beused with any Meinberg GPS receiver with serial interface.

Detailed information on the program can be found in the online help.

Please note:
Our support for this program will be discontinued in July 2017.In the future please use the Meinberg Device Managerfor our systems.


MBG Flash Program


MBGFLASH
for
Windows
Software
mbgflash-1.13.exe
August 20, 2014
570 KB

This utility can be used to update the firmware of radio clockswhich have an onboard flash memory via the clock's serial port.Simply download and run the EXE file to install the utility.

Additionally, a firmware image file is required which is uploadedto the device. Be sure to use an image file which is appropriatefor the type of device.


Visio Shapes


Visio Shapes
for
MS Visio 2003
ZIP File
meinberg_visio_shapes-2015.zip
2015-11-23
16 MB

This ZIP archive contains some .VSS files to be used with Microsoft Visio, containing shapesfor various Meinberg NTP time server models and radio clocks, representing these systemsin different form factors and types in your Visio drawings.

The files were created and have been tested with MS Visio 2003.Other versions for Visio 2000 and Visio 2002 are available on request.

More details about Microsoft Visio can be found onMicrosoft's Visio Homepage.


Download Electro-voice Port Devices Driver Updater

SNMP Management Information Base (MIB) Files


SNMP MIB Files
ZIP Archive
meinberg-mibs.zip
2020-04-09
62 kB

These files are required by most SNMP based network management systems in order to access the informationprovided by Meinberg products via SNMP.

Files included for SNMP-ROOT, LANTIME V5/V6/V7, XPT, FDMXPT, RSC (MDU), meinbergOS (microSync), SyncBox/N2X.