Hjelmslund Port Devices Driver

-->

For most devices, the Ports device setup class and the Serial function driver provide the functionality required to operate serial ports and COM ports. To install serial ports and COM ports using these system-supplied components, do the following:

  • Provide an INF file that specifies the Ports device setup class and the Serial function driver as the service for the port.

  • To configure a serial port as COM port, comply with the requirements that are defined in Configuration of COM Ports.

USB™ multi-port adapters with Ethernet connectivity and some Ethernet adapters are not compatible at this time (due to IC design). Click here for more information. The display driver does not support Mac® computers with the M1 processor at this time, contact your computer manufacturer to verify if your computer supports the display driver. A storage device must be accessible and should be able to copy a file 200MB or more in size. If the device has multiple functions, such as scan & print, make sure to test both the scan and print functionality. If the device is a USB Type-C device, confirm that the applicable USB and alternate modes are functional. Using ETW to log issues.

On Windows 10, a device driver is an essential piece of code, which allows the system to interact with a specific hardware (such as graphics card, storage driver, network adapter, Bluetooth, etc. Unknown devices show up in the Windows Device Manager when Windows can’t identify a piece of hardware and provide a driver for it. An unknown device isn’t just unknown — it’s not functioning until you install the right driver. Windows can identify most devices and download drivers for them automatically.

Hjelmslund

Hjelmslund Port Devices Driver Updater

For more information about installing serial ports and COM ports using the Ports device setup class and the Serial function driver, see the following topics:

Hjelmslund Port Devices Driver

If you do a custom installation of a COM port, you must comply with the COM port requirements that are defined in Configuration of COM Ports.